FAQ
Vortex Bed Liners
How much time does it take to install a Vortex Bed Liner?
A professionally installed Vortex Bed Liner typically takes about 3-4 hours. Check with your local dealer, but you can normally take your truck home the same day you drop it off.
How long until I can use my truck bed?
Vortex dries in under 7 seconds. However, we recommend that you wait about 24 hours before heavy duty use. This will allow the bed liner material to fully cure.
What else can be Vortexed?
Vortex can be applied to most properly prepared surfaces for durable and long-lasting protection. We frequently coat rocker panels, grille guards, bumpers, and fender flares. We have even seen a couple vehicles coated from top to bottom with Vortex. Vortex can also be used to protect trailers, ATVs, tractors, boats and much more.
Can Vortex be used as an undercoating?
Because of Vortex's strong bond and extreme strength, we do not recommend using for for undercoating. This may make it impossible to get anything apart. If you are doing a frame-off restoration, Vortex works very well on individual parts or frames.
Is Vortex removable?
Vortex liners are designed to provide permanent protection for your truck. We expect that after you see how well Vortex protects your truck, you'll surely never want to remove it.
Is Vortex environmentally friendly?
Yes. Vortex coatings contain no VOCs or CFCs. Vortex is the only system that can spray at only 8psi. This means that there is only 2% material waste, unlike high pressure systems that can waste 20% - 30%
Can a Vortex liner be repaired?
Yes. Vortex can easily be repaired to leave a seamless finish.
Can I get a Vortex liner in color?
Yes. Vortex Liners can be sprayed in virtually any color you'd like. Also, with our UV stable top coating, you can have a liner that actually stays the color you want it. Also, ask about Vortex EP.
Vortex™ SprayLiner Machine
Vortex™ Sprayliners, Inc. developed the Vortex™ Spray System. The world’s largest portable sprayliner system company. With over 50 years of coating experience behind the Vortex™ Spray System, nobody comes close to this Patent Pending Technology. The Vortex™ Sprayliner System excels over all other spray systems on the market in several ways:
- The ONLY true portable high build, high impact spray coating system in the world.
- No need for bulky compressors or separate drier rooms, everything is self-contained.
- Patent Pending Technology for exclusivity and superiority.
- Exclusive designed Spray System, Coating Material and Process.
- 100% Solids Polyurethane/Polyurea two component product developed by Kott Koatings International exclusively for Vortex™ Sprayliners, Inc.
- The Vortex™ Spray System utilizes a patented WhisperJet™ Technology. This gives us the lowest pressure system in the industry. You think 100 psi is low, how about only 8 psi? Now that’s low! This gives the vortex machine 98% transfer efficiency, which means less mess, less waste and higher profits. Why throw material away on the floor or ceiling using high pressure?
- The Vortex™ Spray System is COMPLETELY SELF CONTAINED. No need for separate, high-cfm, high-pressure compressors, heated material liners, special drying equipment. You can simply take the Vortex™ spray cart to your job location, plug it in and start spraying on a Vortex™ seamless coating.
- The Vortex™ spray gun wand is machined of high quality aircraft aluminum, making it easy to maintain and easy to clean. The Vortex™ spray wand also has a reusable Vortex purge tank. This exclusive design eliminates the need for separate purge lines required for other systems.
